Author Topic: 2 Men & a Floorpan #355 - Avanti fiberglas floorpan at the Molded Fiber Glass Co (Read 1178 times)

Otto Puzzell · « **on:** October 26, 2012, 05:08:19 AM »

Those one of these guys looks like he's stifling a yawn, the floorpan with which they are posing caused a bit of buzz when the car of which it was an integral part was introduced.

For one point: What company made it, and what car will this floorpan become part of?

Only a complete and specific answer will earn a point!

If you haven't registered yet, you need to do so in order to reply. You can do so by clicking here

If you have not done so, please familiarize yourself with the AutoPuzzles Rules before attempting to solve this puzzle.

Otto Puzzell · « **Reply #1 on:** November 02, 2012, 04:27:38 AM »

ValkyrieGT · « **Reply #2 on:** November 02, 2012, 06:07:50 PM »

Hudson Motor Company, Detroit Michigan. 1951-1954 Hudson Hornet..step-down floor pan. Lowered the center of gravity for Hudson Hornet cars, they were lower than contemporary cars..with a sleeker appearance.

Otto Puzzell · « **Reply #3 on:** November 03, 2012, 04:15:27 AM »

Not a Hudson

richard cuyler · « **Reply #4 on:** November 03, 2012, 10:56:07 AM »

It doesn't look like a steel pressing and there seems to be a bit of glassfibre apparent to the bottom right, so I assume it's made of this material and may be something like a Corvette floorpan. Just a wild guess, really.

Otto Puzzell · « **Reply #5 on:** November 03, 2012, 11:54:23 AM »

Not a Corvette piece

RayTheRat · « **Reply #6 on:** November 07, 2012, 09:02:51 PM »

GM product?

Otto Puzzell · « **Reply #7 on:** November 08, 2012, 03:52:21 AM »

No sir, though it was replaced by one. Sort of.....

sixtee5cuda · « **Reply #8 on:** November 08, 2012, 07:55:11 AM »

Is this a mould or stamping die?

Otto Puzzell · « **Reply #9 on:** November 08, 2012, 10:47:11 AM »

No, it's a floor pan.

RayTheRat · « **Reply #10 on:** November 08, 2012, 11:41:53 AM »

Floor pan for the 1940 Pontiac Series 26 Plexiglass show car?

Otto Puzzell · « **Reply #11 on:** November 08, 2012, 01:10:17 PM »

No, not a Pontiac; not from a GM brand (see above)

RayTheRat · « **Reply #12 on:** November 08, 2012, 01:11:50 PM »

Quote from: Otto Puzzell on November 08, 2012, 01:10:17 PM

No, not a Pontiac; not from a GM brand (see above)

I saw it, but I didn't understand (still don't) it.

Otto Puzzell · « **Reply #13 on:** November 08, 2012, 01:13:15 PM »

As time goes forward, it will, I think, make sense.

RayTheRat · « **Reply #14 on:** November 08, 2012, 01:23:50 PM »

Ok. Let's try something else. Is it a floor pan for a unit-body car?

Otto Puzzell · « **Reply #15 on:** November 08, 2012, 01:28:10 PM »

Quote from: RayTheRat on November 08, 2012, 01:23:50 PM

Ok. Let's try something else. Is it a floor pan for a unit-body car?

No

RayTheRat · « **Reply #16 on:** November 08, 2012, 01:30:43 PM »

Made in the 1950s?

Otto Puzzell · « **Reply #17 on:** November 08, 2012, 01:32:12 PM »

RayTheRat · « **Reply #18 on:** November 08, 2012, 01:34:11 PM »

Otto Puzzell · « **Reply #19 on:** November 08, 2012, 01:38:32 PM »

Getting colder....

RayTheRat · « **Reply #20 on:** November 08, 2012, 01:45:03 PM »

ok, 60s?

Otto Puzzell · « **Reply #21 on:** November 08, 2012, 02:02:05 PM »

Now you're talkin'

sixtee5cuda · « **Reply #22 on:** November 08, 2012, 02:06:06 PM »

Not sure this was clearly stated.

Is the floorpan metal?

RayTheRat · « **Reply #23 on:** November 08, 2012, 02:07:41 PM »

Made in USA?

Otto Puzzell · « **Reply #24 on:** November 08, 2012, 02:08:04 PM »

Quote from: sixtee5cuda on November 08, 2012, 02:06:06 PM

Not sure this was clearly stated.

Is the floorpan metal?

No

News:

Author Topic: 2 Men & a Floorpan #355 - Avanti fiberglas floorpan at the Molded Fiber Glass Co (Read 1178 times)

RayTheRat

RayTheRat

RayTheRat

RayTheRat

RayTheRat

RayTheRat

RayTheRat

RayTheRat