AutoPuzzles - The Internet's Museum of Rare Cars!

Puzzles, Games and Name That Car => Solved AutoPuzzles => 2010 => Topic started by: Quiller on February 28, 2010, 04:59:16 PM

Title: Q688 - solved - Corvetty
Post by: Quiller on February 28, 2010, 04:59:16 PM

What's the name of this car?

Title: Re: Q688
Post by: knightfan26917 on March 12, 2010, 12:55:36 AM

NO idea ... but it looks like a Corvette and a Mazda had a child....lol.



Cort | 36swm.IL | "Mr Monte Carlo"."Mr Road Trip" | pig valve.pacemaker * my radio show.03/13/10 *
WRMNshowcase.legos.HO.models.MCs.RTs.CHD = http://www.chevyasylum.com/cort
"Did the trail of yellow brick come to an end?" ... Debby Boone ... 'Are You On The Road To Lovin' Me Again?'

Title: Re: Q688
Post by: Quiller on August 01, 2010, 06:53:58 PM

You're not a million miles off
Time for a move up

Title: Re: Q688
Post by: DeAutogids on August 03, 2010, 06:37:56 AM

Mazda RX7 as a base?

Title: Re: Q688
Post by: Quiller on August 04, 2010, 01:28:14 PM

Quote from: DeAutogids on August 03, 2010, 06:37:56 AM

Mazda RX7 as a base?

Yup!

Title: Re: Q688
Post by: Quiller on August 23, 2010, 11:25:57 AM

Going to the highest level

Title: Re: Q688
Post by: guido66 on September 04, 2010, 11:29:48 AM

Was the conversion done in Japan?

Title: Re: Q688
Post by: Quiller on September 05, 2010, 12:06:53 PM

Yes it's Japanese

Title: Re: Q688
Post by: SeaLion on September 10, 2010, 05:50:15 PM

This is a full aero kit for the 1979-1985, 1st Generation Mazda RX-7. It is 100% made in Japan and is made to make your RX-7 look like a C4 Chevy Corvette, hence the kit name - Corvetty. This is a very rare kit and was only available in Japan and Australia for a few years. It's all fiberglass and comes with mounting hardware and brackets. You need to supply the bumper lights and tail lights from a C4 Corvette.

Title: Re: Q688
Post by: Quiller on September 10, 2010, 06:32:04 PM

Quote from: SeaLion on September 10, 2010, 05:50:15 PM

This is a full aero kit for the 1979-1985, 1st Generation Mazda RX-7. It is 100% made in Japan and is made to make your RX-7 look like a C4 Chevy Corvette, hence the kit name - Corvetty. This is a very rare kit and was only available in Japan and Australia for a few years. It's all fiberglass and comes with mounting hardware and brackets. You need to supply the bumper lights and tail lights from a C4 Corvette.

well hello sealion - you are a winner  :applause:

Title: Re: Q688 - solved - Corvetty
Post by: knightfan26917 on September 14, 2010, 01:15:42 AM

Holy cow ... can't believe I was on the right track.  A few more steps and I woulda had that point...LOL!



Cort | 36.m.IL | 5 Monte Carlos.1 Caprice Classic | pig valve.pacemaker * Chicagoland Meets, 2011?
MCs.CC | models.HO.legos.CHD.RadioShows | RoadTrips.us66 = http://www.chevyasylum.com/cort
"It's always the same old story, you never know what you've got til its gone" ... Mike & the Mechanics ... 'All I Need Is A Miracle'

Title: Re: Q688 - solved - Corvetty
Post by: gte4289 on November 06, 2024, 10:49:08 PM

Brochure: