Author Topic: Joao Gois #82 - SOLVED: 1986 Alfa Romeo GTV6 2.5 Zagato  (Read 1405 times)

0 Members and 1 Guest are viewing this topic.

Offline Joao Gois

  • Expert
  • *
  • Posts: 1324
  • Country: pt
  • Puzzle Points 90
  • Car freak...
  • YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Joao Gois #82 - SOLVED: 1986 Alfa Romeo GTV6 2.5 Zagato
« on: November 27, 2009, 08:33:20 AM »
What engine's this? One point for who tells me what car held this engine, as also the engine type.
« Last Edit: November 27, 2009, 01:53:47 PM by Joao Gois »
Powered by passion, driven by knowledge

Offline HEMI 426

  • Expert
  • *
  • Posts: 132
  • Country: cs
  • Puzzle Points 52
  • Mopar or no car
  • YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
    • http://www.oldtajmeri.rs/phpbb3
Re: Joao Gois #82
« Reply #1 on: November 27, 2009, 11:11:37 AM »
This is Alfa Romeo GTV6, it's 2.5 L V6 with 12 valves and 160 PS
Engine is so called Busso V6, which had many incarnation and was made ( in all variants ) from 1979-2005
United Serbian Carjacking Syndicate

Offline Joao Gois

  • Expert
  • *
  • Posts: 1324
  • Country: pt
  • Puzzle Points 90
  • Car freak...
  • YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: Joao Gois #82
« Reply #2 on: November 27, 2009, 01:52:41 PM »
Well, I'm going to give you the point anyway but this was taken from the Zagato. The engine hood is flat. ;)

BTW, damn, you're good! :P
Powered by passion, driven by knowledge

Offline 75america

  • Expert
  • *
  • Posts: 1874
  • Country: be
  • Puzzle Points 293
  • Gran Torino
  • YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: Joao Gois #82
« Reply #3 on: November 27, 2009, 02:27:17 PM »
Engine is so called Busso V6, which had many incarnation and was made ( in all variants ) from 1979-2005

I have both an Alfa 75 3.0 6V america and a GTV 2.0 V6 Turbo  ::)
Still the best (sounding) V6 in the world  :)

Offline max_pershin

  • *
  • Posts: 55
  • Country: ua
  • Puzzle Points 25
  • AutoPuzzles
  • YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: Joao Gois #82 - SOLVED: 1986 Alfa Romeo GTV6 2.5 Zagato
« Reply #4 on: April 24, 2010, 11:03:59 AM »
This car was not equipped 2.5 V6. Its 1983 Alfa GTV6 Zagato with 3.0 engine
And this car isn't transaxel.

Offline Joao Gois

  • Expert
  • *
  • Posts: 1324
  • Country: pt
  • Puzzle Points 90
  • Car freak...
  • YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: Joao Gois #82 - SOLVED: 1986 Alfa Romeo GTV6 2.5 Zagato
« Reply #5 on: April 24, 2010, 11:13:59 AM »
Sorry?? Of course it is a 2.5 V6 engine! 2492cc (88mm x 68,3mm) engine, 160bhp longitudinal engine... and transaxle gearbox!
Powered by passion, driven by knowledge

Offline max_pershin

  • *
  • Posts: 55
  • Country: ua
  • Puzzle Points 25
  • AutoPuzzles
  • YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: Joao Gois #82 - SOLVED: 1986 Alfa Romeo GTV6 2.5 Zagato
« Reply #6 on: April 24, 2010, 11:34:08 AM »
Central tunnel from Alfa 6, ZF gearbox coupled with engine, like Alfa 6. Steering wheel from Giulietta Turbodelta, seats from Spider '83.

And Autodelta 3.0 V6 engine.
« Last Edit: April 24, 2010, 11:58:13 AM by max_pershin »

Offline Joao Gois

  • Expert
  • *
  • Posts: 1324
  • Country: pt
  • Puzzle Points 90
  • Car freak...
  • YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: Joao Gois #82 - SOLVED: 1986 Alfa Romeo GTV6 2.5 Zagato
« Reply #7 on: April 24, 2010, 08:07:28 PM »
I think you are a bit confused there. Autodelta 3.0 litre engine was a V8, not a V6. And the 3-litre V6 was only introduced by Alfa Romeo in 1987...

"The Alfetta introduced a new drivetrain layout to the marque. Clutch and transmission were housed at the rear of the car, together with the differential for a more balanced weight distribution "  in Wikipedia.
Powered by passion, driven by knowledge

Offline max_pershin

  • *
  • Posts: 55
  • Country: ua
  • Puzzle Points 25
  • AutoPuzzles
  • YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: Joao Gois #82 - SOLVED: 1986 Alfa Romeo GTV6 2.5 Zagato
« Reply #8 on: April 25, 2010, 03:10:49 AM »
Autodelta engine V6 3.0 for 1984 South African GTV 6 :) (limited series for omologation, only 200 cars were made)
2934 cm
93x72
9:1
186 hp at 6700 rpm
26.5 kgm at 4300 rpm

But GTV6 3.0 was used 6 dell'Orto FRPA40 from Alfa6. This Zagato GTV6 3.0 was used Bosch L-Jetronic

Offline max_pershin

  • *
  • Posts: 55
  • Country: ua
  • Puzzle Points 25
  • AutoPuzzles
  • YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: Joao Gois #82 - SOLVED: 1986 Alfa Romeo GTV6 2.5 Zagato
« Reply #9 on: April 25, 2010, 03:25:54 AM »
Central tunnel from Alfa 6, ZF gearbox coupled with engine, like Alfa 6. Steering wheel from Giulietta Turbodelta, seats from Spider '83.

And Autodelta 3.0 V6 engine.


Offline max_pershin

  • *
  • Posts: 55
  • Country: ua
  • Puzzle Points 25
  • AutoPuzzles
  • YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: Joao Gois #82 - SOLVED: 1986 Alfa Romeo GTV6 2.5 Zagato
« Reply #10 on: April 25, 2010, 03:30:03 AM »
I think you are a bit confused there. Autodelta 3.0 litre engine was a V8, not a V6. And the 3-litre V6 was only introduced by Alfa Romeo in 1987...

"The Alfetta introduced a new drivetrain layout to the marque. Clutch and transmission were housed at the rear of the car, together with the differential for a more balanced weight distribution "  in Wikipedia.


Offline Paul Jaray

  • Editor
  • *
  • Posts: 22326
  • Country: it
  • Puzzle Points 2073
  • MVP
  • YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: Joao Gois #82 - SOLVED: 1986 Alfa Romeo GTV6 2.5 Zagato
« Reply #11 on: April 25, 2010, 03:35:56 AM »
Pag.38  ;)

Offline Joao Gois

  • Expert
  • *
  • Posts: 1324
  • Country: pt
  • Puzzle Points 90
  • Car freak...
  • YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: Joao Gois #82 - SOLVED: 1986 Alfa Romeo GTV6 2.5 Zagato
« Reply #12 on: April 25, 2010, 10:25:07 AM »
I think you are a bit confused there. Autodelta 3.0 litre engine was a V8, not a V6. And the 3-litre V6 was only introduced by Alfa Romeo in 1987...

"The Alfetta introduced a new drivetrain layout to the marque. Clutch and transmission were housed at the rear of the car, together with the differential for a more balanced weight distribution "  in Wikipedia.



But that's not the Zagato... that's the South African GTV6, which had a bored-out 3.0L version of the 2.5L V6 the European V6 used...
Powered by passion, driven by knowledge

Offline max_pershin

  • *
  • Posts: 55
  • Country: ua
  • Puzzle Points 25
  • AutoPuzzles
  • YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: Joao Gois #82 - SOLVED: 1986 Alfa Romeo GTV6 2.5 Zagato
« Reply #13 on: April 25, 2010, 11:19:07 AM »
Whats your source about Zagato car? :)

I know about 3l engine from arocalfissima forum.

And this car is not transaxel :) this GTV based on Alfa 6 platform.
Source: Stefano Agazzi - Head of Alfa Romeo’s Historic Activity Department and Alfa Romeo Museum Curator

Offline Joao Gois

  • Expert
  • *
  • Posts: 1324
  • Country: pt
  • Puzzle Points 90
  • Car freak...
  • YearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYearsYears
Re: Joao Gois #82 - SOLVED: 1986 Alfa Romeo GTV6 2.5 Zagato
« Reply #14 on: April 25, 2010, 11:57:35 AM »
Whats your source about Zagato car? :)

I know about 3l engine from arocalfissima forum.

And this car is not transaxel :) this GTV based on Alfa 6 platform.
Source: Stefano Agazzi - Head of Alfa Romeo’s Historic Activity Department and Alfa Romeo Museum Curator

I'm not going to argue about the gearbox layout cause that I had no backup, since I thought they used the regular GTV6 as base for the Zagato, not a whole different base.

As for the V6, I have to check my register...
Powered by passion, driven by knowledge